“数字示波器”专销电话

专销电话电话：010-84851836

产品分类

ABCDEFGHIJKLMNOPQRSTUVWXYZ

BK2530BK2530双频道数字示波器

添加时间：2010-5-20 16:50:28 担当：未知阅读：次

产品名称：BK2530BK2530双频道数字示波器
定货号：DF-00556-00

推荐：

The 2530 Digital Storage Oscilloscope delivers essential features and reliable performance at a price you can afford. Analog style knobs and controls combined with a smart Autoset function make this oscilloscope easy to use. Advanced triggering, automatic measurements and FFT functions provide you with many options to debug your circuits. Additionally, the instrument comes with PC Software that lets you easily capture, analyze and document waveforms and measurement results. The 2530 is an ideal education and training tool and also well suited for applications in service and repair.

25 MHz bandwidth, 250MSa/s sample rate

One touch automatic setup for ease of use (Auto)

4000 point record length for each channel

Cursors with readouts

Eleven automatic measurements

FFT standard plus 4 additional math functions

Extensive Trigger capabilities including Pulse Width and line-selectable Video trigger

Save/Recall setup and waveform data

Transfer waveform data, screen shots and measurement results to a Windows PC via USB port. Analyze measurement results “off-line” or in real-time

Specifications

Model 2530

Key Characteristics

Bandwidth

25 MHz

Real time sample rate, each channel

250 MSa/s

Equivalent sample rate

50GSa/s

Rise time

< 14ns

Channels

Lower frequency limit

< 5Hz (at input BNC)

Display

Monochrome LCD, 5.7 inch (145mm) diagonal

Record Length*

4000 points

Vertical Resolution

8 bit

Vertical Sensitivity

2mV - 5V/div

DC gain accuracy

±3.0%

Maximum Input Voltage

300 Vrms, CAT II (between signal and reference BNC connector)

Position Range

2mV - 100mV range: ±2V
200mV - 5V range: ±40V

Time Base Range

2.5 ns/div - 50 s/divV

Time Base Accuracy

100ppm

Input Coupling

AC, DC, GND

Input Impedance

1MΩ || 13Pf

Vertical and Horizontal Zoom

Vertically or horizontally expand or compress a live or stopped waveform

I/O interface

USB device port for connection to PC. (Requires included EasyScope Software for use)

* The instrument displays 2500 points. 4000 points can be retrieved from internal memory with the included EasyScope application. This feature is supported for time base settings ranging from 2.5µs/Div - 50ms/Div (scan mode not active)

Acquisition Modes

Sample

Display sample data only

Peak Detect

Average

Waveform averaged, selectable from 4, 16, 32, 64, 128, 256

Scan Mode

For time base settings 0.1s/div - 50s/div

Trigger System

Trigger Types

Edge, Pulse Width, Video

Trigger Modes

Auto, Normal, Single

Trigger Coupling

AC, DC, LF reject, HF reject

Trigger Source

CH1, CH2, AC line, Ext, Ext/5

Holdoff range

100ns - 1.5s

Trigger Level Range	CH1, CH2	±12 divisions from center of screen
	EXT	±2.4V
	EXT/5	±12V

Pulse Width Trigger	Pulse Width Range	20ns - 10s
Pulse Width Trigger	Trigger Condition	(>, <, =) positive Pulse (>, <, =) negative Pulse

Edge Trigger

Trigger Polarity

Rising and Falling Edge

Video

Supports formats PAL/SECAM, NTSC. Triggers on odd or even field, all lines or line number

Cursors

Types

Amplitude, Time

Measurements

ΔV, ΔT, 1/ΔT

Automatic Waveform Measurement

Time

Rise time, Fall Time, Cycle Frequency, Period, Positive Pulse width, Negative Pulse width

Voltage

MAX, MIN, Peak-Peak, Average, Vrms

Frequency	Hardware counter providing frequency readout of trigger source
	Readout resolution	6 digits
	Range	10Hz to max Bandwidth (DC Coupling)
	Supported signal types	all trigger modes except pulse width trigger and Video Trigger