



添加时间:2010-6-5 11:10:11 担当:未知 阅读:次
|
Specification | |
|
General | |
|
Detection method |
IR-absorbtion, dual wavelength, dual path |
|
IR-Source |
Solid state IR source, 50Hz flash |
|
Gases detected |
Hydrocarbons, see separate data sheet for CO2 detection |
|
Self-test |
Continuous |
|
Calibration |
Factory set, no field recalibration |
|
Performance | |
|
Lifetime stability |
±5% of full scale (FS) reading |
|
Accuracy |
±3% FS between 0-50 % reading |
|
|
±5% FS between 50-100 % reading |
|
Response time |
T20 = 1 sec. (Option 0.3 sec) |
|
|
T50 = 2.5 sec. (Option 0.7 sec) |
|
|
T90 = 6 sec. (Option 1.6 sec) |
|
Start-up time |
Less than 60 sec. |
|
Output Signal | |
|
Standard |
Current source 4 – 20 mA, max. load impedance 500 Ohm |
|
Option |
Current sink 4 – 20 mA |
|
Option |
HART® |
|
Detector warnings: | |
|
Early clean optics |
Pre warning (1 mA pulse) |
|
Clean optics |
Dirt accumulation (1 mA) |
|
Clean optics |
Dirt accumulation (1 mA) |
|
|
Option: Dirt accumulation (2mA) |
|
Detector failure |
Internal fault (0 mA) |
|
Electrial | |
|
Power supply |
24 V DC, range18-32 V DC |
|
Power consumption |
Approx. 3.5 W |
|
Connection |
3 wires (0.5mm2 - 1.5mm2) |
|
Cable entry |
M20 EExe cable gland |
|
Temperature Range | |
|
Storage |
-40°C to + 70°C (-40°F to +158°F) |
|
Operating |
-40°C to + 65°C (-40°F to +149°F) |
|
Humidity (operation) |
100% RH |
|
Exsplosion Proof Housing | |
|
Main housing |
EExd IIC T6 |
|
Terminal compartment |
EExe |
|
Protection category |
IP66/IP67 DIN 40050 |
|
Housing material |
Stainless steel SIS2343 (ASTM 316) |
| 定货号 | 产品名称 | 规格配置 | 价格 |
|---|---|---|---|
| YD-05857-00 | 标准配置或电话咨询010-84851836 | 咨询 |