ETR110废气温度记录套装

ETR110

The ETR110 is a complete Exhaust Temperature Profiling Kit designed to profile the exhaust temperature of on-road vehicles and off-road equipment, including tractor trailers, buses, trucks over 14,000 lbs., waste water vehicles, and sweepers. The ETR110 kit comes assembled and includes a data logger, temperature sensor (thermocouple type K), weatherproof enclosure, USB datalogger interface cable (IFC200), hex screwdriver and software. Setup is fast and easy. The data logger, which is contained within the water resistant enclosure, is mounted to the vehicle. Using the MadgeTech software, the logger is programmed to record for a set period, generally three to five days. Data is stored in the data logger, and is downloadable at any time via a pc or laptop computer. The complete temperature profile is then provided to the diesel particulate filter (DPF) manufacturer, aiding in the selection of the correct DPF for the exhaust system. Many DPF manufacturers, including Donaldson Corp., recommend the use of temperature profiling equipment, such as the MadgeTech ETR110, to aid in the selection of the appropriate diesel particulate filter.

 

Specifications
Internal Channel Temperature Sensor:		Semiconductor
Internal Channel Temperature Resolution:		0.1°C
Internal Channel Calibrated Accuracy:		±0.5°C
Remote Channel Temperature Sensor:		Thermocouple Type K
Remote Channel Range, Resolution & Accuracy:		See Table
Cold Jct. Compensation:		Automatic
Channels:		1 Internal & 1 Remote
Memory:		16,383/channel
Sample Rate:		2 seconds up to 12 hours
LED Indicator:		Red
Required Interface Package:		IFC110
Baud Rate:		57,600
Typical Battery Life:		10 years
Operating Environment:		-40~+80°C, 0~95%RH non-condensing
Material:		ABS plastic
Dimensions:		1.7" x 2.3" x 0.8", (44mm x 59mm x 21mm)
Weight:		15oz.