Ultra 1000有毒气体/氧气传感器
添加时间：2009-10-21 编辑：读取中…… 阅读：次
- 产品名称：Ultra 1000有毒气体/氧气传感器
- 产品定货号：MR-00211-00
Features
RS-485 MODBUS Serial Output
4-20mA Analog Output
12-28 VDC Operation
Automated Non-Intrusive Calibration
Fully Adjustable Alarm Relay
Lower wiring costs
Description
Ultra 1000 series is a microprocessor based addressable sensor for toxic gas detection. The self- contained sensor features user friendly interface and menu driven calibration procedure and configuration.
The complete sensor consists of a stainless steel sensor head assembly, a user connection board and a transmitter board assembly. All of the sensor electronics are enclosed in an explosion proof instrument box. The unit’s modular design allows easy maintenance, troubleshooting and high reliability.
The unit provides a 4-20mA signal proportional to 0 to 100% of the detection range. In addition the sensor may be addressed via MODBUS RTU interface. The MODBUS output provides sensor status, alarm & fault conditions. Alarm levels can be programmed via MODBUS RTU or via magnetic switch on the face of the transmitter board assembly.
Ultra 1000 can be calibrated in less than 2 ½ minutes. The calibration and the set-up parameters are retained in a non-volatile memory.
Specifications
Sensor Type
Electrochemical
Measuring Range
|
Ammonia (NH3) |
50 ppm |
|
Carbon Monoxide (CO) |
100 & 1000 ppm |
|
Chlorine (CL2) |
10 ppm |
|
Chlorine Dioxide (CLO2) |
50 ppm |
|
Ethylene (C2H4) |
100 pm |
|
Ethylene Oxide (C2H4O) |
50 ppm |
|
Hydrogen Chloride (HCL) |
20 ppm |
|
Hydrogen Sulfide (H2S) |
100 ppm |
|
Hydrogen (H2) |
100 & 1000 ppm |
|
Hydrogen Cyanide (HCN) |
30 ppm |
|
Methyl Mercaptan (CH3SH) |
100 ppm |
|
Nitrogen Dioxide (NO2) |
20 ppm |
|
Nitric Oxide (NO) |
100 ppm |
|
Oxygen Deficiency (O2) |
25% |
|
Sulfur Dioxide (SO2) |
50 ppm |
Repeatability
± 2 % Full scale
Zero Drift
< 5% per year
Response Time
T90 < 30 seconds
Classification
Class I, division 1, Groups B,C & D
Operating Temperature
-4°F to +122°F (-20°C to +50°C)
Operating Humidity
15% to 90% RH, non-condensing
Display
2 lines by 8 Character LC Display with back light
Mechanical Specifications
Length: 7 inches (178 mm)
Width: 5 inches (127 mm)
Height: 4.5 inches (114 mm)
Status Indicators
Three-digit display for gas concentration, Alarm relay status, calibration mode and sensor fault status.
Input Power
14-28 VDC. 24 VDC nominal
Power Consumption
90mA @ 24 VDC Typical
Alarm Relays
Fully programmable.
0 to Full scale range of the sensor.
Latching or Non-Latching.
Relay Ratings
SPDT Form “C” type Relay contacts
5 Amps @ 250 VAC or 30 VDC
Analog Output
Linear 4-20mA (300 Ohms max. load)
2.0 mA - Calibration mode
< 1.0 mA - Sensor malfunction
Calibration
Non-Intrusive activated by internal magnetic switch
Cable Requirement
3 wire shielded cable. Max loop resistance 20 Ohms
Cable Entry Hub
Features
RS-485 MODBUS Serial Output
4-20mA Analog Output
12-28 VDC Operation
Automated Non-Intrusive Calibration
Fully Adjustable Alarm Relay
Lower wiring costs
Description
Ultra 1000 series is a microprocessor based addressable sensor for toxic gas detection. The self- contained sensor features user friendly interface and menu driven calibration procedure and configuration.
The complete sensor consists of a stainless steel sensor head assembly, a user connection board and a transmitter board assembly. All of the sensor electronics are enclosed in an explosion proof instrument box. The unit’s modular design allows easy maintenance, troubleshooting and high reliability.
The unit provides a 4-20mA signal proportional to 0 to 100% of the detection range. In addition the sensor may be addressed via MODBUS RTU interface. The MODBUS output provides sensor status, alarm & fault conditions. Alarm levels can be programmed via MODBUS RTU or via magnetic switch on the face of the transmitter board assembly.
Ultra 1000 can be calibrated in less than 2 ½ minutes. The calibration and the set-up parameters are retained in a non-volatile memory.
Specifications
Sensor Type
Electrochemical
Measuring Range
|
Ammonia (NH3) |
50 ppm |
|
Carbon Monoxide (CO) |
100 & 1000 ppm |
|
Chlorine (CL2) |
10 ppm |
|
Chlorine Dioxide (CLO2) |
50 ppm |
|
Ethylene (C2H4) |
100 pm |
|
Ethylene Oxide (C2H4O) |
50 ppm |
|
Hydrogen Chloride (HCL) |
20 ppm |
|
Hydrogen Sulfide (H2S) |
100 ppm |
|
Hydrogen (H2) |
100 & 1000 ppm |
|
Hydrogen Cyanide (HCN) |
30 ppm |
|
Methyl Mercaptan (CH3SH) |
100 ppm |
|
Nitrogen Dioxide (NO2) |
20 ppm |
|
Nitric Oxide (NO) |
100 ppm |
|
Oxygen Deficiency (O2) |
25% |
|
Sulfur Dioxide (SO2) |
50 ppm |
Repeatability
± 2 % Full scale
Zero Drift
< 5% per year
Response Time
T90 < 30 seconds
Classification
Class I, division 1, Groups B,C & D
Operating Temperature
-4°F to +122°F (-20°C to +50°C)
Operating Humidity
15% to 90% RH, non-condensing
Display
2 lines by 8 Character LC Display with back light
Mechanical Specifications
Length: 7 inches (178 mm)
Width: 5 inches (127 mm)
Height: 4.5 inches (114 mm)
Status Indicators
Three-digit display for gas concentration, Alarm relay status, calibration mode and sensor fault status.
Input Power
14-28 VDC. 24 VDC nominal
Power Consumption
90mA @ 24 VDC Typical
Alarm Relays
Fully programmable.
0 to Full scale range of the sensor.
Latching or Non-Latching.
Relay Ratings
SPDT Form “C” type Relay contacts
5 Amps @ 250 VAC or 30 VDC
Analog Output
Linear 4-20mA (300 Ohms max. load)
2.0 mA - Calibration mode
< 1.0 mA - Sensor malfunction
Calibration
Non-Intrusive activated by internal magnetic switch
Cable Requirement
3 wire shielded cable. Max loop resistance 20 Ohms
Cable Entry Hub
泰亚赛福 —— 世界领先的检测仪器集成供应商 
您当前的位置：
加入对比
