Series 9510二氧化碳分析仪

添加时间：2009-11-6 编辑：读取中…… 阅读：次

加入购物车

加入对比

产品名称：Series 9510二氧化碳分析仪
产品定货号：MR-01634-00

产地：美国
推荐：

The Series 9510 Carbon Dioxide Analyzer is designed to provide continuous, unattended measurement of carbon dioxide in other gases. Measuring ranges include either percentage or trace (PPM). The 9510 may be used for applications where spot monitoring of various points is of interest.

Features	Benefits
State-of-the-Art Sensor Technology	High Precision Measurements
Three Alarm Relays	Easily Set Threshold Values
Rapid Speed of Response	Senses Changes in Gas Composition in Seconds
Audible & Visual Alarm Indication	Alerts User of Abnormal Operating Conditions
Optional RS-232 or 485	Interfaces with Serial Communication Equipment
Rugged Polycarbonate Enclosure	Ideal for a Variety of Industrial/Commercial Applications

System Description
The Series 9510 Carbon Dioxide Analyzer is designed to provide continuous, unattended measurement of carbon dioxide in other gases. Measuring ranges include either percentage or trace (PPM). The 9510 may be used for applications where spot monitoring of various points is of interest. The bench-top/portable enclosure can be equipped with optional battery operation making it ideal for remote monitoring. For safety related applications, the Series 9510 can be equipped with an open sensor diffuser that allows free movement of ambient air to the sensor without the use of a sample pump.

The focal point of the Series 9510 is its state-of-the-art sensor technology. Alpha Omega Instruments carbon dioxide sensor features a next generation NDIR (non-dispersive infrared) measuring system. The carbon dioxide sensor incorporates closed-loop control for enhanced long-term calibration stability. The control signal is generated by means of an optical referencing element that monitors source intensity.

Specifications
Performance
Percent Ranges: 0-20, 0-10, 0-5
Trace Ranges: 0-5,000 PPM
Measurement Error:

Percent: ± 5.0% of reading 0.15% of CO2, whichever is greater

Trace: ± 110 ppm CO2 or ± 5% of reading,whichever is greater

Response Time: <35 seconds to a 63% step change
Sensor Type: Non-Dispersive Infrared
Temperature Compensation: Standard.Operation
Temperature Range: 40° to 100°F (5° to 38°C)
Sample Gas Pressure Limits: 0.1 to 2.0 psig
Sample Flow Rate: 200-500 ml/min. A constant sample flow of 200 ml/min + 10 ml is recommended
Warranty: Two years electronics and sensor

Electrical
Power Source: 115/230 VAC/50-60 Hz (Battery Powered Optional)
Analog Output: 4-20 mADC and 0-2 VDC (field scalable)
Optional Serial Communications: RS-232C or RS-485
Enclosure: Polycarbonate-rated NEMA 1
Display: 3-1/2 digit liquid crystal display
Dimensions: 10.9” H x 6.5” W x 6.0” D
Weight: 7.5 lbs. (Benchtop Configuration)
Oxygen Alarm Relays: Three (3) SPDT Form C contacts rated 10A @ 30VDC/115/230 VAC
Audible and Visual Alarm