Coercimeter it is intended for non-destructive testing assurance thermal, thermomechanical or thermochemical processing, and as definitions of hardness and mechanical properties of details from ferromagnetic materials in the presence of correlation communication between supervised and measured in the parameters. The device can be used for grading of metals on marks of steel and the testing of blankets of ferromagnetic materials.

The transducers is an added electromagnet with demountable polar tips and with the gauge of the Holla in its magnetic chain. The principle of work of the device consists in magnetization of a controllable site of a detail with the subsequent demagnetization its accruing field, the fixing of intensity of a field corresponding coercimeter to force of a material of a detail, and measurement of amplitude of a signal from the Holla gauge.

 

 

Basic Delivery Set

KIM-2M main unit

Transducer

Power supply 220V/10V

Interface cable RS232 for PC connection

Software CD-ROM

Protective cover

Transport bag

Additional implements

Demountable tips for the transducer

Technical Characteristics coercimeter

Base-time measurement values

coercive force,
residual magnetic induction at partial demagnetization,
residual magnetization

Corcive force measurement range

up to 150 А/m to 4500 А/m

Magnetization

by 220 V pulse; pulses quantity can adjust from 0 to 10

Demagnetization

by preset current 0-1000 mA in steps of 1 mA

Measurement time

5 sec. at 3 magnetization pulses

Scales

15 programmable direct from keypad
or by PC scales, up to 10 points
for linear approximation

Indication accuracy

1, 0.1, 0.01 or 0.001 - is
set at programming scales

Mains power

internal Li-Ion battery or
power unit 220 V AC

Operating time

not less than 5 hours from batteries "АА"

Operating voltage

9 - 12 V

Operating temperature

0 C to +50 C

Dimensions of the electronic block (H x W x D)

205 mm x 115 mm x 50 mm

Dimensions Transducer (H х W х D)

60 mm x 75 mm x 35 mm

Weight with elements batteries

1.2 kg