Built around RKIs latest smart sensor technology, the SC-01 is a versatile single toxic gas monitor. The smart sensors are interchangeable, with the SC-01 automatically recognizing any sensor change without any set up or configuration changes. The sensors calibration information also stays with each sensor. Weighing only 7.6 ounces, it has many features which set it apart from the competition. For example, it offers sensors for Ammonia (NH3), Arsine (ASH3), Carbon Monoxide (CO), Chlorine (Cl2), Hydrogen Cyanide (HCN), Hydrogen Sulfide (H2S), Phosphine (PH3), and Sulfur Dioxide (SO2). The SC-01s unique extender cable allows the sensor to be attached to the end of a 10 foot cable for remote monitoring and quick response.

 

Features

Smart interchangeable sensors

Wide range of toxic gases

Unique extender cable for remote monitoring

Compact (2.5 x 5.2 x 1.2 in.)

Lightweight, 7.6 ounces

250 hours of continuous operation

Operates on 2 “AA” alkaline batteries

Audible / visual / vibration alarms

Datalogging standard

Impact resistant protective rubber boot

Intrinsically safe, CSA, C/US classified

Applications

Utilities

Personal monitoring

Refineries / petrochemical

Chemical plants

Hazmat response

Water / wastewater treatment

Semiconductor plants

The SC-01's large LCD display shows the gas reading, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms that can be set to latching or self-resetting. Controlled by a microprocessor, the SC-01 continuously checks itself for sensor connections, low battery and circuit trouble. The batteries are simple to replace, requiring no tools to access the battery compartment. One set of AA alkaline batteries provides continuous operation for over 250 hours.

The SC-01 is equipped with datalogging capability as a standard feature which communicates through an IR port with an optional Windows¨ based datalogging software program. Calibration intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired.

 

Specifications