The Saf-T-Mount section is a unique device that allows the climber to dismount from the Saf-T-Climb system at predetermined points along the climb without jeopardizing safety. The worker may pivot 90° from the climb onto a platform or other safe work area before detaching from the system. The Sleeve can then be removed from the rail so that the climber may continue the climb on another ladder or other workers may pass on the same ladder. For maximum safety, before dismounting or remounting, the climber should be secured by a lanyard to a suitable anchor point. The Saf-T-Mount section is designed for permanent installation within the Saf-T-Notch rail at any desired point and must be included when the system is originally installed. Saf-T-Mount Sections are not required at the beginning or the end of a climb.

The Saf-T-Mount Section can be used in a variety of work situations. Examples include: work sites where more than one climber is required to work at different levels of the some climb; above water where the surface level may change; installed at intervals on climbs within chimneys where manlifts are used to allow access to the carrier rail for emergency exits; in the grain storage industry where emergency escape from silos and storage bins may be required. The Saf-T-Mount Section is 9" long replacing 6" of rail. It is available in Galvanized, Stainless Steel or Aluminum.