The new CHECK-LINE TI-UMX2 Underwater Wall Thickness Gauge accurately measures the wall thickness of all metals, extent of corrosion and the thickness of coatings on them -- at depths of up to 1000 feet (300 Meters).

A back-lit LCD display and illuminated housing allow divers to easily read measurements in dark water.

An over-sized control button and clever menu structure allows easy gauge setup and navigation through menus above or below water even when wearing thick gloves.

The TI-UMX-2 can store up to 5000 readings including A-Scan Waveforms and settings for each individual measurement. There are 2 file structure options; sequential with auto identifier and alpha numeric grid (row/column) format. The UMX-2 can transfer data and configuration settings to a PC using our DataComm software. (Software and transfer cable included)

The list of preset velocities are as follows:

1. Aluminum 2024

2. Stainless Steel 302

3. Steel4340

4. Iron

5. Cast Iron

6. PVC

7. Polystyrene

8. Polyurethane

Features

Housing is rated for dive depths up to 1000 ft (300 meters) with backlit display  Resolution of 0.001" (0.01 mm) with user-selected units of inch or mm  Includes built-in datalogger for 5000 readings, settings and waveforms in sequential or "grid" (row/column) format  Automatic probe recognition and auto zero  Supplied with FREE NIST-Traceable Calibration Certificate  Supplied with data transfer cable and FREE data analysis software

Measure modes include: Pulse-Echo, Pulse-Echo w/ Coating, Echo-Echo and Triple Echo  CE-certified with 3-Year Warranty (90 days on probe)  Measures BOTH Wall and Coating Thickness  Both Dual Element and Single Membrane Probes are offered  Standard Probe supplied is 1/2"-5MHz HD-Coating, Underwater p/n T-074-2906  All settings for gauge and datalogging can be done via software if desired