Protal7200修复墨盒

Denso Protal 7200 Repair Cartridges are specially formulated for patching and repairing damaged FBE and other liquid-coated pipelines. The repair cartridges are packaged in 2-component tubes that are applied with a dispensing gun (sold separately). Two convenient sizes (400 mL and 50 mL) are available.

Repair coating for damaged FBE and other liquid coated pipelines. Also used as coating of Cadweld areas.

Excellent adhesion (compliments FBE coated pipe)

High build (in one coat)

High abrasion resistance for drilling applications

Does not shield cathodic protection

Application

Repair areas shall be roughened using Carborundum cloth or 80-grit sandpaper and wiped clean with an isopropyl alcohol soaked cloth prior to patching. Material can be applied by injecting material into a small container and mixing until a uniform color is achieved. Material can then be brush applied to specified mil thickness (minimum 20 mils). Cure times are dependent on temperature and will be extended at cooler temperatures. 

Properties	Data
Solids Content / Percent Reactive	100%
Mixed Material (Mixed) @ 77°F (25°C)      Specific Gravity      Viscosity      Color	1.63 Thixotropic Liquid Green
Mixing Ratio by Volume	2 Parts Base:1 Part Hardener
Handling Times      Ambient & Substrate Temp. @ 90°F (35°C)      Ambient & Substrate Temp. @ 70°F (25°C)	90 minutes 3 hours
Recommended Thickness	25 - 30 mils
Cathodic Disbondment      28 Days @ 77°F (25°C)      28 Days @ 150°F (65°C)	3 mm 4 mm
Adhesion to Steel	2600 psi
Adhesion to FBE	1100 psi
Hardness (ASTM 2240) Shore D	85 min.
Gouge Resistance	3 Passes = 0 Fail @ 50 kg
Application Temperature	-30°F to 185°F (-34°C to 85°C) If temperature falls below 50°F (10°C), surface should be preheated.
Service Temperature	-40°F to 185°F (-40°C to 85°C)
Holiday Detection (Maximum)	2000 Volts