Moisture Encounter PLUS 湿度测试仪

Deeper signal penetration up to over 1" into the materials being tested.

Wider range of readings for wood of 5% to 30% and 0 to 100 comparative for all other materials.

Larger clear easy to read display giving meaningful readings.

Hold Function enables user to "freeze" the reading. Useful for taking readings when the meter face is not visible.

Switch-able "On" or "Off" audio warning tone.

Automatic Power Cutoff switches "Off" when not in use.

Automatic Default to last user setting when switched back on.

Industry

Wood, flooring, Indoor Air Quality, Water Restoration, Pest Control, Inspection/Surveying.

Material

Wood, Plaster / Brick, Tiles, Plasterboard (drywall), Roofing (membranes and insulation).

Features

The Moisture Encounter PLUS incorporates all the features and benefits found in the original Moisture Encounter such as: Non-destructive moisture measurement of wood, plaster, drywall block, brick, roofing and most materials found in the building envelope. Three measurement ranges optimized for testing different materials. Deep signal penetration up to 1.25”(30mm) to detect elevated moisture through most covering materials without having to damage or puncture the materials being tested. Suitable for use on covering materials such as: Porcelain or Ceramic tile, Drywall, Carpet, Vinyl Flooring, VCT tile, Floor Laminates, Wall Coverings, Roofing Membranes. External Rubber electrodes make direct contact with the material being tested for best sensitivity, repeatability and greater depth of signal penetration. In addition to these features the Moisture Encounter PLUS offers the following: Wide range of readings for wood of 5% to 30% on wood scale and 0 to 100 on comparative scale for other materials. Large clear easy to read display giving meaningful readings. Hold Function which enables the user to “freeze” the reading, useful when taking readings where the meter face may not be visible. High Moisture Audio Warning Tone which can be switched on or off. Automatic Power Cutoff switches “Off” when not in use.

Specification

The Moisture Encounter Plus Operates on the principal of non-destructive impedance measurement. Coplanar electrodes are fitted on the base of the instrument from which low frequency signals are transmitted into the material being tested, measuring the change in impedance caused by the presence of moisture. This reading is translated by the instrument into a moisture content reading.

Warranty

All Tramex products carry a full satisfaction guarantee including a one year warranty against defects in parts & workmanship and a refund if the unit is returned, shipping pre-paid, in new condition within 21 days of original delivery. Proof of purchase is necessary.