ТEMP-2便携式硬度计

Hardness tester is intended for the express local measurement by a dynamic method of hardness in various products (from a steel, its alloys and welded joints, pig-iron, nonferrous metals, rubber, other materials) on scales of Brinell (НВ), Rockwell (HRC), Vickers (HV), Shore "D" (HSD) and also for strength definition on a stretching of products from carbonaceous steels pearlite a class in accordance with GOST 22791-77. Hardness tester can be used in industrial and laboratory conditions.

Base scales can be written down at the enterprise who manufactured or independent on samples of hardness from the keyboard of the device or automatically calculation according to measurements and are written down from the personal computer. Up to 32 scales of hardness (HB, HRC, HV, HSD, HRB, HRN, HRT, HL and etc.) in total can be written down. With software use statistical data processing and their preservation on a disk is accessible.

Hardness tester is certified in Gosstandart of Russia (the certificate № 9315 ), is registered in the National register of means of measurements under №15711-96 also admitted to application in the Russian Federation, Ukraine, Republic of Belarus and Kazakhstan. ТEМP-2 also is registered in the National register of Gosstandart of Ukraine, Republic of Belarus, Kazakhstan and in the branch Register of measuring apparatuses of Ministry of Railways of the Russian Federation under № МТ-021.2000.

 

 

Basic Delivery Set

ТEМP-2 hardness electronic module

Transducer with screened cable

Batteries (3 element "АА")

Cable RS232 for connection PC

Software support for PC

Transport bag

Technical Characteristics

A measurement range on a scale of Rockwell

22-68 HRC

A measurement range on a scale of Brinell

100-450 HB

A measurement range on a scale of Vickers

100-950 HV

A measurement range on a scale of Shore

22-99 HSD

Diameter spherical identation

3 mm

Hardness of a material identation

1600 HV

Measurement time

1 s

Minimum weight of a testing product

2 кg (measurement of details with smaller weight is possible at their grinding on a massive plate)

Roughness of a testing surface no more

Ra 2,5

Thickness of a wall of a supervised vessel of pressure or the pipeline

not less than 6 mm

Scales

up to 32 scales

Programmable scale

from keypad or by PC

Automatic calculation and programming of scales by means of the PC

yes

Сommunication with PC

RS232, USB (by adapter)

Number of measurements for definition average value of hardness

up to 4 to 100

Quantity of remembered measurements results in non-volatile memory

200

Mains power

2 batteries "АА"

Operating time

not less than 120 hours

Operating voltage

3 V

Operating temperature

up to -20 C to +60 C

Base Unit Dimensions (H x W x D)

135 mm x 65 mm x 30 mm

Weight with batteries

220 g (in the plastic case)

500 g (in the metal case)