泰亚赛福 —— 世界领先的检测仪器集成供应商
努力为您创造价值
智能 编号 品牌
腐蚀控制产品
产品导航
 您当前的位置:阴极保护防腐 >> 腐蚀控制产品 >> 热收缩膜 >> CANUSA定向钻井工具包

CANUSA定向钻井工具包

添加时间:2010-11-10 编辑: 阅读:

  • 产品名称:CANUSA定向钻井工具包
  • 产品定货号:MS-00430-00
  • 产地:美国
  • 推荐:
Product Description
Canusa's TBK - Directional Drilling Kit is a high-performance system designed to protect welded joints on 2 and 3-layer PE, PP and FBE coated pipelines in directional drills. The system consists of three components: a primary heat-shrinkable sleeve which provides corrosion protection at the joint; a secondary heat-shrinkable sleeve which functions as a sacrificial wear cone; and a high-build epoxy top coat at the ends to provide additional protection to the system. The system provides effective protection against abrasion and wear forces that occur during the pull-through operation. The system is fully compatible with cathodic protection systems, resists cathodic disbondment and is designed for a wide range of operating temperatures.
The Canusa Wrapid Sleeve™ Type TBK-60 is a one-piece wraparound sleeve designed for corrosion protection of buried and exposed steel pipelines operating up to 60 C (140 F). Wrapid Sleeve™ Type TBK-60 consists of a cross-linked polyolefin backing, coated with a technologically advanced protective adhesive which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy.
Features & Benefits
Long-Term Corrosion Protection: Canusa's TBK - Directional Drilling Kit provides superior corrosion protection because of the epoxy primer and the protective shrink sleeve. This combination provides excellent resistance to cathodic disbandment and excellent durability against abrasion and chemical attack. The result is effective, long-term protection against corrosion.
Superior Abrasion Resistance: Canusa’s TBK - Directional Drilling Kit utilizes multilayer sleeves coated with a heat activated adhesive. The inherent performance properties associated with the sleeve adhesive reduces damage of the coating during pipeline installation and provides excellent resistance to soil stresses and pipe movements. The narrow, epoxy coated sacrificial sleeve is applied to the leading edge of the primary sleeve. The hardened
epoxy topcoat provides the additional abrasion and wear resistance to withstand the forces during directional drilling.
Convenient Epoxy Kit: Epoxy primer is supplied in kits with all tools required to apply this system. The convenient ready-to-mix epoxy packaging minimizes installation time and
labor costs while promoting high production rates.
Product Selection Guide
Selection Steps:
Choose 2- or 3-layer TBK system based on mainline coating.
Choose TBK system(s) based on expected pipe surface temperature during directional drilling and pipeline operating temperature.
Choose ultimate TBK system based on pipeline performance requirements sand pipe size range. Product must be installed by pre-heating to the minimum installation temperature. Product must be installed by following the specific Product Installation Guide.
Typical Product Properties
 

产品名称产品简介产品编号
CANUSA定向钻井工具包MS-00430-00



相关产品