Syntho-QuickSet的环氧涂料

Syntho-Quickset™ is a fast-setting, Kevlar reinforced, adhesive and repair epoxy system.

Typical Applications

Bonding applications

Pipe repairs

Concrete repairs

Chemically resistant coatings

Sets rapidly in thin films, even under adverse, humid conditions.

Fast setting time

Good chemical resistance

DOT Non-corrosive

1 lb and 4 lb containers

Special packaging available upon request

Physical Properties

Color, Resin Color, Catalyst Viscosity, 25°C, Resin Viscosity, 25°C, Catalyst Specific gravity, 25°, Resin Specific gravity, 25°C, Catalyst Mix ratio by weight (resin:catalyst) Thin film set time, 25°C Gel time,100 grams, 25°C Flexural strength Flexural modulus Tensile strength Tensile modulus Elongation	Gray White Paste  000 cps 1.56 1.1 100:13 1.5 hrs 15 minutes 16,700 psi 377 psi 9,400 psi 493 psi 2.5%
Chemical resistance Gasohol Sydrol Distilled water Inorganic acids Alkalies Dilute Acetic Acid	Excellent Excellent Excellent Excellent Excellent Excellent

1. , Clean and roughen: Surfaces must be clean and grease free. Use an oil-free solvent such as acetone to wipe surfaces. Adhesion can be substantially increased by abrading the surfaces to be bonded with emery cloth, sand paper, carbide grinding tools, sand blasting, carbide grinding tools, sand blasting, etc. A roughened, porous surface will produce the best results. Any oxidized metal films should be removed just prior to application of the epoxy adhesive mixture.

2., Mix: Thoroughly mix by weight 100 parts Epoxy to 13 parts Catalyst.

3., Application: Apply mixed product within five to ten minutes.

4., Storage & Handling: Store in a cool, dry place in original containers. Expected shelf life is one year in original unopened containers. Please read the Material Safety Data Sheet (MSDS) before using this or any other chemicals.