Canusa-CP外涂层管

CANUSA-CPS Wrapid Coat™ is tough, polyvinyl chloride based tape with special high tack adhesive formulated to resist corrosion of metal piping systems above and below ground, fittings and joints on all mill-coated pipe as an outer wrap for Wrapid Bond™ coated pipe.

 Adhesion & Creep Resistance

Resistant to corrosive salt water, soil acids, alkalies and salts, common chemicals, chemical vapors, and exposure to outdoor weathering and sunlight.

Resistant to impact, abrasions, punctures, and tears. Wrapid Coat™ is a highly conformable, all-weather 0.50 mm (20 mil) thick tape designed for application over a wide temperature range.

High dielectric strength, and excellent insulating properties.

The high tack adhesive and tough backing provides an effective barrier to water and oxygen which provides effective corrosion protection and soil stress resistance.

Long shelf-life (does not harden).

Various widths available with convenient roll lengths for ease of inventory.

Fast installation with excellent adhesion on steel and many other base surfaces without applying a primer.

Impermeable to water and oxygen.

CANUSA-CPS products such as Wrapid Sleeve™, CanusaWrap™, CanusaTube™, and Wrapid Tape™ have been oil, gas and civil infrastructure industry standards for many years. Wrapid Coat™ is an outer wrap for Wrapid Bond™ coated pipe.

Property	Test Standard	Wrapid Coat™
Color of Backing	-	Black
Color of Adhesive	-	Black
Thickness	ASTM D1000	0.51 mm (20 mils)
Elongation @ Break,	ASTM D1000	100%, -12°C (10°F) 150%, 23°C (74°F)
ensile Strength	ASTM D1000	70 N/cm (40 pli)
Adhesion to Steel	ASTM D1000	3.3 N/cm (1.9 pli), -12°C (10°F) 2.2 N/cm (1.3 pli), 23°C (74°F)
Roll Unwind	ASTM D1000	1.75 N/cm (1.0 pli), -12°C (10°F) 1.75 N/cm (1.0 pli),  23°C (74°F)
Water Vapor Transmission Rate	ASTM D3833	1.0 g / 645 cm2 / 24 hrs
Moisture Absorption	ASTM D570	0.35%
Dielectric Strength	ASTM D1000	20 kV
Application Temperature Range	-	-12 to 65°C (10 to 150°F)
Service Temperature Range	-	-48 to 75°C (-55 to 167°F)